SW 100

VERSIONS :

SW 100 D amplifier with:
- Display
- Digital control
- IEEE 488 GPIB Communication

SW 100 DC : SW 100 D with :
- Integrated bidirectional coupler
- display of instantaneous power

MAINTENANCE :

Amplifier designed for minimal maintenance
- Easy access to all parts
- Modular design
- Repairs with minimum adjustments
Rapid diagnostic
Minimal downtime
Contract for preventive and corrective maintenance available

APPLICATIONS :

Download the datasheet

Frequency bandwidth : 0.8 GHz - 4 GHz
Typical output power : 100 W
Power at 3 dB compression : 90 W min. up to 3 GHz / 70 W min. from 3 GHz to 4 GHz *
Power at 1 dB compression : 70 W min. up to 3 GHz / 60 W min. from 3 GHz to 4 GHz *
Harmonics distortion : H2,H3 < -20 dBc for the output power at 1 dB compression
Class type : Class A
Gain : 56 dB
Linear power gain flatness : ± 5 dB max
Mismatch tolerance : infinite without damage
Input impedance : 50 ohms / VSWR: 2:1max
Output impedance : 50 ohms / VSWR: 2:1max
Input power : +10 dBm max
RF input connector : Type N fem. (front or rear panel) – other connector type on request
RF output connector : Type N fem. (front or rear panel) – other connector type on request
Safety interlock : Connector type BNC
Digital control : Transistors, power supplies and internal temperature
Communication interface : IEEE 488
4 lines digital display : Status, faults, (direct and reverse instantaneous power for DC version)
Ambient operating temperature : 0 °C / + 35 °C
Room temperature storage : -20 °C / +70 °C
Cooling : Forced air: 120 l/sec max. (self contained fans)
Power voltage : 200-250 VAC, 47-63 Hz, single phase
Rated current : 4.8 A at 230 VAC
Dimensions : 640 x 450 x 312 mm (7U) / 25.2 x 17.7 x 12.3 in (7U)
Weight : 33 kg / 73 lb

Integrated bidirectional power coupler : Coupling factor 59 dB typ.
Power coupling connector : Type N fem. (rear panel)
Estimated output power losses due to the coupler : 0.4 dB * => take account these power losses for the min output power