DT 170/130

Class A solid state
Broadband (instantaneous dual band): 9 kHz – 1000 MHz
Frequency extension between 4 kHz and 9 kHz upon request
Typical output power :
- 170 W CW (9 kHz – 200 MHz) and
- 130 W CW (200 MHz – 1 GHz)
Linear output power (1 dB compression) guaranted with harmonics <-20 dBc:
- P1dB > 100 W and H<-20dBc at 9 kHz
- P1dB > 110 W and H<-20dBc from 10 kHz to 200 MHz
- P1dB and H < -20 dBc from 200MHz to 1000MHz
Air cooling: self contained fans
Can operate in full mismatch conditions without damage
Reliable, efficient and robust
19" Rack
3 years standard warranty

VERSIONS :

DT 170/130 D amplifier with:
- Multicolor LCD display with touch panel
- Digital control
- IEEE 488 GPIB, Ethernet, USB, RS232 Communications
- Temperature controlled fans
- Safety interlock
DT 170/130 DC : DT 170/130 D with :
- Integrated dual directional coupler
- display of instantaneous incident and reflected power

MAINTENANCE :

Amplifier designed for minimal maintenance
- Easy access to all parts
- Modular design
- Repairs with minimum adjustments
Rapid diagnostic
Minimal downtime
Contract for preventive and corrective maintenance available

APPLICATIONS :

EMC tests
RF tests and instrumentation
Radiocommunication
Measurement and research laboratories

Download the datasheet

Frequency bandwidth : Low band: 9 kHz - 200 MHz / High band: 200 MHz - 1000 MHz
Typical output power : 170 W / 130 W
Power at 3 dB compression : 120W min at 9 kHz/140W min 10kHz-200MHz/155W min .2-.45GHz/125W min .45-1GHz
Power at 1 dB compression : 100W min at 9 kHz / 110W min from 10kHz to 450MHz / 90W min from 450MHz to 1GHz
Harmonics distortion : H2,H3 < -20 dBc for the output power at 1 dB compression or limit
Class type : Class A
Gain : 48 dB
Linear power gain flatness : ± 3 dB max
Mismatch tolerance : infinite without damage
Input impedance : 50 ohms / VSWR: 2:1max
Output impedance : 50 ohms / VSWR: 2:1max
Input power : +10 dBm max.
RF input connector : Type N fem. (front or rear panel) – other connector type on request
RF output connector : Type N fem. (front or rear panel) – other connector type on request
Safety interlock : Connector type BNC
Digital control : Transistors, power supplies, temperatures, fans
Communication interface : Ethernet, USB, GPIB, RS232
Color LCD Display with touch screen : Status, faults, (direct and reverse instantaneous power for DC version)
Ambient operating temperature : 0 °C / + 35 °C
Room temperature storage : -20 °C / +70 °C
Cooling : Forced air with fan speed control: 120 l/sec max. (self contained fans)
Power voltage : 200-250 VAC, 47-63 Hz, single phase
Rated current : 3.5 A at 230 VAC
Dimensions : 640 x 450 x 178 mm (4U) / 25.2 x 17.7 x 7 in (4U)
Weight : 24 kg / 60 lb